Changes to Step #3
Edit by Chris Reinhart —
Edit approved by Chris Reinhart
- Before
- After
- Unchanged
Step Lines
| + | [* black] The image shows the plywood pieces needed to make the door module. |
|---|---|
| + | [* black] CUT LIST |
| + | [* black] 2 @ 12" wide x 7' - 10 3/4" long |
| + | [* black] 1 @ 12" wide x 3' 9 1/2" long |
| + | [* black] First, rip the plywood into 12" wide strips using the table saw. |
| + | [* black] Then, measure and mark the lengths onto the 12" wide strips. |
| + | [* black] Cut the strips to length with your circular saw. |
Image 1
No previous image
Added