Changes to Step #2
Edit by Andrew Graham —
Edit approved by Andrew Graham
- Before
- After
- Unchanged
Step Lines
| + | [* black] Place the lid into the seal, so that it rests with equal clearance on the left and right side (should be 1/4" each side). ensure the top and bottom edges are flush with the top and bottom of the seal edges. you may need to position something at the base to keep it from sliding out of place. this will be used as a guide for the hinges. |
|---|---|
| + | [* black] Tack 2x P31 hinge pieces in position - Ensure after placing a washer on the outside face of the hinges that it is flush with lid struts (P26) on the ends. |