Changes to Step #5

Edit by Anthony Douglas

Edit approved by Andrew Graham

Before
After
Unchanged

Step Lines

[* black] ***Quality control Checklist***
[* black] Make sure that P18 and P19 overlap by 1"
[* black] Make sure that P18 and P19 are centered with respect to one another
-[* black] Make sure that 1/2" of cutting knife is exposed, and that 1/4" is exposed after grinding
-[* black] Make sure that P15 is oriented with the holes pointing away from the teeth
-[* black] Make sure that the angle between P15 and P18 is 90 degrees (? shouldn't P15 and P18 be parallel ?)
+[* black] Make sure that at least about 1/2" of cutting knife is exposed after grinding
+[* black] Make sure that P15 is oriented with the side closest the holes on the side farthest away from the teeth
+[* black] Make sure that the angle between the long leading edge of P15 and P18 is 90 degrees i.e. those teeth are pointing straight outwards.