Changes to Step #3

Edit by Andrew Graham

Edit approved by Andrew Graham

Before
After
Unchanged

Step Lines

-[* black] Weld 4 teeth at the proper spacing (4" on center ? and 2" on center from edge ? ) to part 15 (tooth bar bolt bar), with X inches overlap between 18 and 15
-[* black] Repeat for the 2 other parts 15
+[* black] Weld 4 teeth at the proper spacing (4" on center ? and 2" on center from edge ? ) to part 15 (tooth bar bolt bar), with X inches overlap between P18 and P15
+[* black] Repeat for the 2 other P15 parts