Changes to Step #4
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [title] Place the cylinder |
|---|---|
| + | [* black] On the side which attaches to the secondary arm, put the pin through the mount, a 1" washer, and the cylinder. |
| + | [* black] The side of the cylinder with the rod attaches to the drawer. |
| + | [* black] Both sides will need a 1" washer to act as a spacer so the cylinder can't slide back and forth. |
| + | [* black] When the cylinder is attached to the drawer, place the mount on your center mark. |
| + | [* black] Square the mount in all directions. |
Image 1
No previous image
Added