Fabrication Instructions - Overall Soil Mixer Step #3 History

Changes to Step #3

Edit by Andrew Graham — Mon 31 Mar 2014 02:08:21 PM MST

	[* black] *CAM Files for Plasma Cutting/CNC*
-	[* black] [http://opensourceecology.org/wiki/Soil_Mixer_-_Overall_Machine_-_CAM\|Latest ~~Sketchup~~ on the ~~Open Source Ecology~~ Wiki]
+	[* black] [http://opensourceecology.org/wiki/Soil_Mixer_-_Overall_Machine_-_CAM\|Latest DXF files on the OSE Wiki]
	[* black] Send the 2 DXF files to a CNC cutter. The smaller sheet is 32" x 48" @ 1/2" thick. The second larger sheet if 48" x 72" @ 1/4" thick. The third file can be cut from standard stock. All of these parts are produced from mild steel.

	[* black] *CAM Files for Plasma Cutting/CNC*
-	[* black] [http://opensourceecology.org/wiki/Soil_Mixer_-_Overall_Machine_-_CAM\|Latest ~~Sketchup~~ on the ~~Open Source Ecology~~ Wiki]
+	[* black] [http://opensourceecology.org/wiki/Soil_Mixer_-_Overall_Machine_-_CAM\|Latest DXF files on the OSE Wiki]
	[* black] Send the 2 DXF files to a CNC cutter. The smaller sheet is 32" x 48" @ 1/2" thick. The second larger sheet if 48" x 72" @ 1/4" thick. The third file can be cut from standard stock. All of these parts are produced from mild steel.