Changes to Step #1
Edit by Andrew Graham —
Edit approved by Andrew Graham
- Before
- After
- Unchanged
Step Lines
| - | [* black] Mount bearings with 1/2" bolts loosely on the side plates P5 and P4 with bearing mount plate P23. |
|---|---|
| + | [* black] Tack the P4 and P5 sidewalls in place leaving a 1/4" gap at the back for the backplate. Make sure they are on their correct sides. |
| + | [* black] Tack the P1 backplate in place and finish the welds for all seams. |
Image 1
Old Version
New Version
Image 2
No previous image
Added