Changes to Step #1

Edit by Andrew Graham

Edit approved by Andrew Graham

Before
After
Unchanged

Step Lines

-[* black] Mount bearings with 1/2" bolts loosely on the side plates P5 and P4 with bearing mount plate P23.
+[* black] Tack the P4 and P5 sidewalls in place leaving a 1/4" gap at the back for the backplate. Make sure they are on their correct sides.
+[* black] Tack the P1 backplate in place and finish the welds.

Image 1

Old Version

New Version

Image 2

No previous image

Added