Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Remount the first plate, and prepare to weld
[* black] Grind off the slag from the torching.
[* black] Mount the first plate back to the hopper supports.
[* black] Use a 1/2"x3" bolt and a nut with washers on each side.
[* black] Lift the side pieces and clamp them to the first plate via the hinge plates.
[* black] Minimize the gap between them as much as you can by pushing them together tightly.

Image 1

No previous image

Added

Image 2

No previous image

Added