Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Clamp the hopper back to supports and torch holes
[* black] Clamp the 34" tall hopper back to the hopper supports.
[* black] It should be centered horizontally between them, and touching the supports all the way down to the hopper mounting plate.
[* black] Torch through the holes circled in the diagram, so you torch through the hopper sheet metal.
[* black] Torch through it on each side, just enough so you have 2 small holes.
[* black] Un-clamp the sheet metal and torch 1/2" holes for the bolt.

Image 1

No previous image

Added

Image 2

No previous image

Added