Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Torch the holes for the hopper mounting plate
[* black] Clamp the hopper mounting plate to the top of the main frame, positioned as shown, with the cutaways positioned by the leg holders.
[* black] Clamp it so that the side you grinded down the welds on is touching the main frame.
[* black] Torch the holes thru to the main frame.
[* black] Check that the fit is good by putting bolts in all the holes.
[* black] Grind away all the slag.
[* black] Bolt the mount to the frame.

Image 1

No previous image

Added