Changes to Step #11
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Step Lines
| + | [* black] INSTALL THE X BELT |
|---|---|
| + | [* black] First cut the belt with a side cutters. |
| + | [* black] Route one end through the X carriage as shown and clamp down with a M3 x 12 SHCS and M3 Washer. |
| + | [* black] Next route the belt around the pulley on the X end motor and the bearings on the X end idler. |
| + | [* black] Finish routing the belt back at the X carriage. |