Changes to Step #2
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Step Lines
| + | [* black] INSTALL IDLER BOLT |
|---|---|
| + | [* black] Install M3 x 25 SHCS, M3 Washer and M3 Nut into the Idler assembly |
| + | [* black] Only put the screw in until the tip is flush with the nut |
| + | [* black] TIP: Set M3 Nut into the hexagon cutout and hold with your finer to install the bolt |