Changes to Step #35
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Step Lines
| - | [* black] Cut rubber gasket to size for the long separator windows - 2 seams on top and bottom horizontals. See example of how the rubber gasket fits in the grooves of the aluminum extrusion. |
|---|---|
| + | [* black] xxxCut rubber gasket to size for the long separator windows - 2 seams on top and bottom horizontals. See example of how the rubber gasket fits in the grooves of the aluminum extrusion. |
| + | [* black] Tighten down the gantry frame to the bottom outer frame. Start with the 4 corners. |