How to build the OSE Lasersaur Outer Frame Step #35 History

Changes to Step #35

Edit by Robert Kirk — Fri 08 Nov 2013 06:59:32 AM MST

Edit approved by Robert Kirk

-	[* black] ~~Cut rubber gasket~~ to ~~size for~~ the ~~long separator windows - 2 seams on top and bottom horizontals~~. ~~See example of how the rubber gasket fits in the grooves of the aluminum extrusion.~~
+	[* black] Tighten down the gantry frame to the bottom outer frame. Start with the 4 corners.

Image 1

No previous image

Added