Changes to Step #3
Edit by Eric Doster —
- Before
- After
- Unchanged
Step Lines
| + | [* icon_note] The depth of the notch was not critical for the purpose of this guide. However, you should use a ruler to mark where to cut out the notch. |
|---|---|
| + | [* black] First reposition the workpiece so that able to cut out the notch. |
| + | [* black] Make the first mark on the workpiece by aligning the ruler against the depth of the cut, then drawing a straight line to the top of the workpiece. |
| + | [* black] Draw another line to the across the top of the workpiece. This will be the line you'll follow with the dozuki in order to create the notch in the workpiece. |
Image 1
No previous image
Added
Image 2
No previous image
Added