Changes to Step #2
Edit by Eric Doster —
- Before
- After
- Unchanged
Step Lines
| + | [* black] Once you've started the cut, you can proceed to delve into the workpiece as deep as necessary. |
|---|---|
| + | [* black] For these cuts, you can pass the saw through the workpiece in both directions, but just make sure to apply downward pressure only on the pull stroke. |
| + | [* black] After you're satisfied with the depth of cut, it will look something like the second picture on this step. |
Image 1
No previous image
Added
Image 2
No previous image
Added