Changes to Overall Machine - PARTS Introduction

Edit by Robert Kirk —

Edit approved by Robert Kirk

Before
After
Unchanged

Parts

  • Aluminum bracket extrusion x1 added.
  • Angle brackets - 39 parts - see Step10 x1 added.
  • Angle brackets, black - 28 parts - see Step11 x1 added.
  • Angle brackets, non-gusseted - 6 parts - see Step12 x1 added.
  • Angle brackets double, gusseted, 38 of these - see Step13 x1 added.
  • Angle brackets double, non-gusseted, 7 of these - see Step14 x1 added.
  • Angle brackets double, gusseted, 7 of these. - see Step15 x1 added.
  • Six ball bearings, 5x19x6 x1 added.

Steps

Step #: 1
Before
stepid 454 stepid 454
After
stepid 454 stepid 454
Step #: 2
Before
stepid 453 stepid 453
After
stepid 453 stepid 453
Step #: 3
Before
stepid 455 stepid 455
After
stepid 455 stepid 455
Step #: 4
Before
stepid 456 stepid 456
After
stepid 456 stepid 456
Step #: 5
Before
stepid 457 stepid 457
After
stepid 457 stepid 457
Step #: 6
Before
stepid 458 stepid 458
After
stepid 458 stepid 458
Step #: 7
Before
stepid 459 stepid 459
After
stepid 459 stepid 459
Step #: 8
Before
stepid 460 stepid 460
After
stepid 460 stepid 460
Step #: 9
Before
stepid 461 stepid 461
After
stepid 461 stepid 461
Step #: 10
Before
stepid 462 stepid 462
After
stepid 462 stepid 462
Step #: 11
Before
stepid 463 stepid 463
After
stepid 463 stepid 463
Step #: 12
Before
stepid 464 stepid 464
After
stepid 464 stepid 464
Step #: 13
Before
After
stepid 465 stepid 465