Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to CEB Shaker Mount Introduction

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged
Category
[ … ]CEB Press
Type
[ … ]installation
Title
[ … ]CEB Shaker Mount
Introduction
[ … ][http://sketchup.google.com/3dwarehouse/details?mid=6949a828e592eac51211da1f85706ccd|Sketchup Model]
Time Required Min
1 hour
Time Required Max
1 hour
Imageid
Before
After
Difficulty
Moderate
Author
Public
Yes
Summary
[ … ]This guide will show how to build the mount which attaches the shaker motor and hammer to the hopper supports.

Tools

  • Angle grinder x1 added.
  • hole puncher x1 added.
  • torch x1 added.
  • Welder x1 added.

Parts

  • 4"x4"x1/2" Angle Steel x1 added.
  • 2"x2"x1/4" Angle Steel x1 added.
  • 1" rebar x1 added.
  • 1/8" Sheet Steel x1 added.

Flags

  • User-Contributed Guide added.