/
/

Site Navigation

Your Account

Choose Language

Changes to Installing Microhouse 2 CEB Walls Introduction

Edit by Workshop One —

Edit approved by Workshop One

Before
After
Unchanged
Introduction
1. Sweep rocks and loose materials off the cement foundation
2. Take sill seal foam gasket (2 rolls approx. 4in wide each) and set each roll side by side starting at one corner
3. Place bricks or weighty material on top of the seal foam gaskets as you roll them out along the foundation
4. Use a sharp knife to cut the material at the end of each corner and restart the above process along the next wall until complete the loop
5. done!
Imageid
Before
After
Summary
Laying the sill seal foam gasket on the foundation. This will be the barrier between the foundation and the CEB.

Flags

  • In Progress added.

Steps

Step #: 1
Before
stepid 970 stepid 970
After
stepid 975 stepid 975
Step #: 2
Before
stepid 972 stepid 972
After
stepid 970 stepid 970
Step #: 3
Before
stepid 973 stepid 973
After
stepid 972 stepid 972
Step #: 4
Before
stepid 974 stepid 974
After
stepid 973 stepid 973
Step #: 5
Before
stepid 976 stepid 976
After
stepid 974 stepid 974
Step #: 6
Before
stepid 975 stepid 975
After
stepid 976 stepid 976