Changes to Installing Module - X End Motor Introduction
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Tools
- 1.27mm Allen Driver x1 removed.
- 2.5mm Allen Driver x1 removed.
Parts
- X motor mount x1 removed.
- Double bearing holder with bearings x1 removed.
- Motor - 2 x1 removed.
- Motor Pulley x1 removed.
- M3 x 25 SHCS with thumb cap x1 removed.
- Z adjustment spring (size/name) x1 removed.
- M3 x 12 SHCS x1 removed.
- M3 Washer x1 removed.
Steps
Step #: 1
Before
After
Step #: 2
Before
After
