Changes to Installing Module - X End Idler Introduction
Edit by Robert Kirk —
Edit approved by Robert Kirk
- Before
- After
- Unchanged
Tools
- 2.5mm Allen Driver x1 removed.
- 5mm Allen Driver x1 removed.
- 13mm Wrench x1 removed.
Parts
- X end idler with inserts x1 removed.
- Double bearing holder with bearings x1 removed.
- M3 x 12 SHCS x1 removed.
- M3 Washer x1 removed.
- 608 Bearing x1 removed.
- M8 x 35 BHCS x1 removed.
- M8 Washer x1 removed.
- M8 Nyloc Nut x1 removed.
Steps
Step #: 1
Before
After
