You're viewing a previously published revision of this guide.  View latest revision

Older
Mar 31, 2014 - 09:03:10
Mar 31, 2014 - 09:03:50 Mar 31, 2014 - 09:03:43 Mar 31, 2014 - 09:03:16 Mar 31, 2014 - 09:03:48 Mar 31, 2014 - 09:03:22 Mar 31, 2014 - 09:03:12 Mar 31, 2014 - 09:03:38 Mar 31, 2014 - 09:03:38 Mar 31, 2014 - 09:03:10 Mar 31, 2014 - 09:03:10 Mar 31, 2014 - 09:03:47 Mar 31, 2014 - 09:03:22
Newer

Shaft fabrication

Written By: Anthony Douglas
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Remove the shaft from the bucket bearings. Grind out a flat 1/4" deep on the shaft P21 in the section for the bolts in the tine modules to tighten against, from the stock cut previously.

    • Remove the shaft from the bucket bearings. Grind out a flat 1/4" deep on the shaft P21 in the section for the bolts in the tine modules to tighten against, from the stock cut previously.

Author

Anthony Douglas

Member since: 3/12/14

101 Reputation

4 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 111