You're viewing a previously published revision of this guide. View latest revision

Aug 08, 2014 - 09:08:51

Aug 09, 2014 - 06:08:30 Aug 08, 2014 - 10:08:12 Aug 08, 2014 - 10:08:09 Aug 08, 2014 - 10:08:46 Aug 08, 2014 - 10:08:39 Aug 08, 2014 - 10:08:31 Aug 08, 2014 - 10:08:57 Aug 08, 2014 - 10:08:34 Aug 08, 2014 - 10:08:03 Aug 08, 2014 - 10:08:06 Aug 08, 2014 - 10:08:32 Aug 08, 2014 - 10:08:07 Aug 08, 2014 - 10:08:04 Aug 08, 2014 - 09:08:21 Aug 08, 2014 - 09:08:02 Aug 08, 2014 - 09:08:00 Aug 08, 2014 - 09:08:08 Aug 08, 2014 - 09:08:58 Aug 08, 2014 - 09:08:51 Aug 07, 2014 - 08:08:37 Aug 07, 2014 - 08:08:14 Aug 07, 2014 - 08:08:21 Aug 07, 2014 - 08:08:35

Newer

Module 9a & b

Written By: Eric Powell (and one other contributor)

Comments: 0
Favorites: 0

Difficulty

Moderate

Steps

Time Required

00:01:30

Introduction

We are going to break down the framing into 11 framing modules that will be assembled on the ground in parallel with other construction processes.

This is the how-to for the modules of the 2nd floor. Starting from the south, they are labeled 4-9 with an "a" and "b" distinction referencing their location on either west or east respectively.

Step 1 Module 9a & b

Gather materials for mod 9a&b (these are enough materials for BOTH walls)

Gather materials for mod 9a&b (these are enough materials for BOTH walls)
8:2x4x8
2:2x4x10
2 sheets of 3/4"x4'x8' OSB for exterior sheathing
2 sheets of 1/2"x4'x8' plywood for interior sheathing
~buncha 3-1/8" construction screws
~buncha 1-5/8" coated deck screws