You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 19, 2014 - 06:02:38
Mar 27, 2014 - 03:03:30 Mar 25, 2014 - 07:03:53 Mar 25, 2014 - 07:03:17 Mar 25, 2014 - 07:03:10 Mar 25, 2014 - 07:03:05 Feb 19, 2014 - 06:02:42 Feb 19, 2014 - 06:02:30 Feb 19, 2014 - 06:02:14 Feb 19, 2014 - 06:02:24 Feb 19, 2014 - 06:02:23 Feb 19, 2014 - 06:02:26 Feb 19, 2014 - 06:02:54 Feb 19, 2014 - 06:02:42 Feb 19, 2014 - 06:02:13 Feb 19, 2014 - 06:02:44 Feb 19, 2014 - 06:02:11 Feb 19, 2014 - 06:02:34 Feb 19, 2014 - 06:02:33 Feb 19, 2014 - 06:02:56 Feb 19, 2014 - 06:02:43 Feb 19, 2014 - 06:02:42 Feb 19, 2014 - 06:02:20 Feb 19, 2014 - 06:02:38 Feb 19, 2014 - 06:02:25 Feb 19, 2014 - 06:02:10 Feb 19, 2014 - 06:02:10 Feb 19, 2014 - 06:02:43 Feb 19, 2014 - 06:02:01 Feb 19, 2014 - 06:02:45 Feb 19, 2014 - 06:02:29 Feb 19, 2014 - 06:02:11 Feb 19, 2014 - 06:02:11 Feb 19, 2014 - 06:02:46 Feb 19, 2014 - 06:02:29 Feb 19, 2014 - 06:02:16 Feb 19, 2014 - 06:02:16 Feb 19, 2014 - 06:02:16 Feb 19, 2014 - 06:02:04 Feb 19, 2014 - 06:02:44 Feb 19, 2014 - 06:02:35 Feb 19, 2014 - 06:02:48 Feb 19, 2014 - 06:02:54 Feb 19, 2014 - 06:02:57
Newer

Installing TAZ Final Assembly

Written By: Robert Kirk
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. GATHER PARTS FOR THE FINAL ASSEMBLY TL-FX0006 Fixture TL-FX0018

    • GATHER PARTS FOR THE FINAL ASSEMBLY

    • TL-FX0006 Fixture

    • TL-FX0018

    • TL-FX0017

  2. ADD FEET TO THE FRAME ASSEMBLY Install 4x rubber feet to bottom of frame. Install 4x rubber feet to bottom of frame.

    • ADD FEET TO THE FRAME ASSEMBLY

    • Install 4x rubber feet to bottom of frame.

  3. ADD FEET TO FRAME ASSEMBLY (continued)

    • ADD FEET TO FRAME ASSEMBLY (continued)

    • Take note of location, do not cover bottom of vertical extrusion.

    • All four feet shown

  4. PLUG IN Z LEFT MOTOR Route Z left motor wire through relief position #5.

    • PLUG IN Z LEFT MOTOR

    • Route Z left motor wire through relief position #5.

    • Plug into the board in location shown.

Author

Robert Kirk

Member since: 4/28/13

2,011 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 332