You're viewing a previously published revision of this guide. View latest revision

Oct 28, 2013 - 01:10:01

Oct 29, 2013 - 08:10:03 Oct 29, 2013 - 08:10:39 Oct 29, 2013 - 08:10:56 Oct 28, 2013 - 08:10:24 Oct 28, 2013 - 08:10:46 Oct 28, 2013 - 03:10:01 Oct 28, 2013 - 03:10:18 Oct 28, 2013 - 03:10:53 Oct 28, 2013 - 03:10:06 Oct 28, 2013 - 03:10:48 Oct 28, 2013 - 02:10:45 Oct 28, 2013 - 02:10:24 Oct 28, 2013 - 01:10:11 Oct 28, 2013 - 01:10:03 Oct 28, 2013 - 01:10:54 Oct 28, 2013 - 01:10:50 Oct 28, 2013 - 01:10:51 Oct 28, 2013 - 01:10:01 Oct 28, 2013 - 01:10:12 Oct 28, 2013 - 01:10:48 Oct 28, 2013 - 01:10:12 Oct 28, 2013 - 01:10:49 Oct 28, 2013 - 01:10:18 Oct 28, 2013 - 01:10:58 Oct 28, 2013 - 01:10:30 Oct 28, 2013 - 01:10:49 Oct 28, 2013 - 01:10:17 Oct 28, 2013 - 01:10:40 Oct 28, 2013 - 01:10:10 Oct 28, 2013 - 01:10:03 Oct 28, 2013 - 12:10:51 Oct 28, 2013 - 12:10:54

Newer

Installing Module- Sheer Shear tightening

Written By: Marcin

Comments: 0
Favorites: 0
Completions: 1

Installing Module- Sheer Shear tightening

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Shear tightening

Take a solid helper bar and push down on the blade spacer assembly by wedging the bar in between the upper and lower blades

Take a solid helper bar and push down on the blade spacer assembly by wedging the bar in between the upper and lower blades

Step 2

Tighten the upper blade holder plate bolts down so that the metal is firm against one another but still able to move. Do this on the side of the ironworker opposite of the table

Tighten the upper blade holder plate bolts down so that the metal is firm against one another but still able to move. Do this on the side of the ironworker opposite of the table