You're viewing the latest revision of this guide.

Mar 27, 2014 - 03:03:33

Mar 27, 2014 - 03:03:33 Mar 27, 2014 - 03:03:21 Mar 27, 2014 - 03:03:15 Feb 18, 2014 - 09:02:32 Feb 18, 2014 - 09:02:10 Feb 18, 2014 - 09:02:55 Feb 18, 2014 - 09:02:55 Feb 18, 2014 - 09:02:05 Feb 18, 2014 - 09:02:54 Feb 18, 2014 - 09:02:54 Feb 18, 2014 - 09:02:08 Feb 18, 2014 - 09:02:07 Feb 18, 2014 - 09:02:55 Feb 18, 2014 - 09:02:43 Feb 18, 2014 - 09:02:27 Feb 18, 2014 - 09:02:48 Feb 18, 2014 - 09:02:03

Newer

Installing Module - Print Head Assembly

Written By: Robert Kirk

Comments: 0
Favorites: 0

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Tools

Parts

Step 1 Installing Module - Print Head Assembly

GATHER THE PARTS FOR THE PRINT HEAD ASSEMBLY
Parts: Extruder Assembly Extruder Mount Budaschnozzle 2.0c with 0.35 nozzle. M4 x 20 SHCS M4 Washer
Tools: 3mm Allen Driver Short piece of 3mm filament

Step 2

Slide the piece of filament through the extruder and into the Budaschnozzle.

ASSEMBLE PRINT HEAD
Slide the piece of filament through the extruder and into the Budaschnozzle.
Insert 2x M4 nuts into the mounting flange of the extruder body.

Step 3

Using 2x M4 x 20 SHCS and M4 washers, assemble the Budaschnozzle, extruder and extruder mount together.

ASSEMBLE PRINT HEAD (continued)
Using 2x M4 x 20 SHCS and M4 washers, assemble the Budaschnozzle, extruder and extruder mount together.
Verify the gear does not rub the mount.

Author

Robert Kirk

Member since: 04/28/2013

2,008 Reputation

24 Guides authored