You're viewing a previously published revision of this guide. View latest revision

Mar 28, 2014 - 01:03:45

Mar 31, 2014 - 09:03:05 Mar 31, 2014 - 09:03:30 Mar 31, 2014 - 09:03:29 Mar 31, 2014 - 08:03:09 Mar 31, 2014 - 08:03:06 Mar 28, 2014 - 03:03:52 Mar 28, 2014 - 03:03:32 Mar 28, 2014 - 03:03:31 Mar 28, 2014 - 03:03:44 Mar 28, 2014 - 03:03:01 Mar 28, 2014 - 03:03:55 Mar 28, 2014 - 02:03:34 Mar 28, 2014 - 02:03:08 Mar 28, 2014 - 02:03:05 Mar 28, 2014 - 02:03:02 Mar 28, 2014 - 02:03:56 Mar 28, 2014 - 01:03:20 Mar 28, 2014 - 01:03:45 Mar 28, 2014 - 01:03:38 Mar 28, 2014 - 01:03:00

Newer

Installing Module - Lid

Written By: Andrew Graham (and one other contributor)

Comments: 0
Favorites: 0
Completions: 1

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Lid

Tack P25 at a 90 degree angle along the length of the bottom of the lid.
Tack 2x P26 Lid Struts onto the ends of the Lid at a 90 degree angle. Ensure a 1/4" space for 2x P29 to fit later (after the hinge and hydraulics are complete)