You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 18, 2014 - 08:02:41
Mar 27, 2014 - 03:03:44 Mar 27, 2014 - 03:03:36 Feb 18, 2014 - 09:02:07 Feb 18, 2014 - 09:02:57 Feb 18, 2014 - 09:02:43 Feb 18, 2014 - 09:02:08 Feb 18, 2014 - 09:02:08 Feb 18, 2014 - 09:02:23 Feb 18, 2014 - 09:02:44 Feb 18, 2014 - 09:02:47 Feb 18, 2014 - 09:02:46 Feb 18, 2014 - 09:02:07 Feb 18, 2014 - 09:02:31 Feb 18, 2014 - 09:02:58 Feb 18, 2014 - 09:02:21 Feb 18, 2014 - 09:02:20 Feb 18, 2014 - 09:02:10 Feb 18, 2014 - 09:02:35 Feb 18, 2014 - 09:02:09 Feb 18, 2014 - 08:02:27 Feb 18, 2014 - 08:02:49 Feb 18, 2014 - 08:02:48 Feb 18, 2014 - 08:02:00 Feb 18, 2014 - 08:02:00 Feb 18, 2014 - 08:02:30 Feb 18, 2014 - 08:02:02 Feb 18, 2014 - 08:02:25 Feb 18, 2014 - 08:02:25 Feb 18, 2014 - 08:02:07 Feb 18, 2014 - 08:02:43 Feb 18, 2014 - 08:02:32 Feb 18, 2014 - 08:02:50 Feb 18, 2014 - 08:02:31 Feb 18, 2014 - 08:02:31 Feb 18, 2014 - 08:02:00 Feb 18, 2014 - 08:02:39 Feb 18, 2014 - 08:02:13 Feb 18, 2014 - 08:02:14 Feb 18, 2014 - 08:02:14 Feb 18, 2014 - 08:02:49 Feb 18, 2014 - 08:02:25 Feb 18, 2014 - 08:02:24 Feb 18, 2014 - 08:02:24 Feb 18, 2014 - 08:02:06 Feb 18, 2014 - 08:02:32 Feb 18, 2014 - 08:02:56 Feb 18, 2014 - 08:02:20 Feb 18, 2014 - 08:02:20 Feb 18, 2014 - 08:02:40 Feb 18, 2014 - 08:02:02 Feb 18, 2014 - 08:02:36 Feb 18, 2014 - 08:02:41 Feb 18, 2014 - 08:02:40 Feb 18, 2014 - 08:02:27 Feb 18, 2014 - 08:02:28 Feb 18, 2014 - 08:02:58 Feb 18, 2014 - 08:02:14 Feb 18, 2014 - 08:02:14 Feb 18, 2014 - 08:02:50 Feb 18, 2014 - 08:02:15 Feb 18, 2014 - 08:02:12 Feb 18, 2014 - 08:02:11 Feb 18, 2014 - 08:02:52 Feb 18, 2014 - 08:02:56 Feb 18, 2014 - 08:02:13 Feb 18, 2014 - 08:02:13 Feb 18, 2014 - 08:02:18 Feb 18, 2014 - 08:02:59 Feb 18, 2014 - 08:02:41 Feb 18, 2014 - 08:02:17 Feb 18, 2014 - 08:02:30 Feb 18, 2014 - 08:02:05 Feb 18, 2014 - 08:02:09 Feb 18, 2014 - 08:02:54 Feb 18, 2014 - 08:02:17
Newer

Installing Module - Frame XZ Assembly

Written By: Robert Kirk
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. GATHER PARTS FOR FRAME XZ ASSEMBLY 3mm Allen Driver Side Cutter

    • GATHER PARTS FOR FRAME XZ ASSEMBLY

    • 3mm Allen Driver

    • Side Cutter

    • Zip Tie Gun

    • 1.5mm Allen Driver 2.5mm Allen Driver 4mm Allen Driver

  2. INSTALL RIGHT Z MOTOR Install a Motor -2 using 4x M3 x 12 SHCS and M3 washers.

    • INSTALL RIGHT Z MOTOR

    • Install a Motor -2 using 4x M3 x 12 SHCS and M3 washers.

    • Take note of wire orientation.

  3. INSTALL LEFT Z MOTOR Install a Motor -1 using 4x M3 x 12 SHCS and M3 washers. Take note of wire orientation.

    • INSTALL LEFT Z MOTOR

    • Install a Motor -1 using 4x M3 x 12 SHCS and M3 washers.

    • Take note of wire orientation.

  4. INSTALL SMOOTH ROD AND X END MOTOR Slide a 10mm smooth rod up through the bottom of the left Z motor mount. Once you get it started, put the X end motor onto the 10mm rod.

    • INSTALL SMOOTH ROD AND X END MOTOR

    • Slide a 10mm smooth rod up through the bottom of the left Z motor mount.

    • Once you get it started, put the X end motor onto the 10mm rod.

    • Slide the rod in until the end is flush with the top of the Z top flat plate.

    • Use a M3 x 6 set screw to secure the rod in place.

    • INSTALL SMOOTH ROD AND X END IDLER

    • Slide a 10mm smooth rod up through the bottom of the right Z motor mount.

    • Once you get it started, put the X end idler onto the 10mm rod.

    • Slide the rod in until the end is flush with the top of the Z top flat plate.

    • Use a M3 x 6 set screw to secure the rod in place.

Author

Robert Kirk

Member since: 4/28/13

2,011 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 191