You're viewing the latest revision of this guide.

Older
Mar 27, 2014 - 03:03:50
Mar 27, 2014 - 03:03:50 Mar 27, 2014 - 03:03:50 Mar 27, 2014 - 03:03:41 Feb 19, 2014 - 12:02:30 Feb 19, 2014 - 12:02:23 Feb 18, 2014 - 05:02:27 Feb 18, 2014 - 05:02:35 Feb 18, 2014 - 05:02:27 Feb 18, 2014 - 05:02:15 Feb 18, 2014 - 04:02:56 Feb 18, 2014 - 04:02:56 Feb 18, 2014 - 04:02:23 Feb 18, 2014 - 04:02:05 Feb 18, 2014 - 04:02:45 Feb 18, 2014 - 04:02:45 Feb 18, 2014 - 04:02:57 Feb 18, 2014 - 04:02:47 Feb 18, 2014 - 04:02:25 Feb 18, 2014 - 04:02:13 Feb 18, 2014 - 04:02:13 Feb 18, 2014 - 04:02:18 Feb 18, 2014 - 04:02:02 Feb 18, 2014 - 04:02:30 Feb 18, 2014 - 04:02:30 Feb 18, 2014 - 08:02:00
Newer

Installing Module - Electronics Case Assembly

Written By: Robert Kirk
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

0

Quiz

0

  1. GATHER PARTS AND TOOLS TO BUILD THE ELECTRONICS CASE ASSEMBLY

    • GATHER PARTS AND TOOLS TO BUILD THE ELECTRONICS CASE ASSEMBLY

    • 2.5mm Allen Driver

    • Electronics case RAMBo 1.1b board Inner strain relief with inserts M3 x 12 SHCS M3 x 5 SHCS M3 washer

  2. INSTALL THE INNER STRAIN RELIEF Install the Inner strain relief using 3x M3 x 12 SHCS and M3 washers.

    • INSTALL THE INNER STRAIN RELIEF

    • Install the Inner strain relief using 3x M3 x 12 SHCS and M3 washers.

  3. INSTALL THE RAMBO BOARD Using 4x M3 x 5 SHCS, install the RAMBo board into the electronics case. Make sure the USB plug lines up with the hole in the case.

    • INSTALL THE RAMBO BOARD

    • Using 4x M3 x 5 SHCS, install the RAMBo board into the electronics case.

    • Make sure the USB plug lines up with the hole in the case.

    • Does the USB plug line up with the case?

Author

Robert Kirk

Member since: 4/28/13

2,011 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 325