You're viewing a previously published revision of this guide. View latest revision

Apr 08, 2014 - 11:04:48

Apr 19, 2014 - 01:04:00 Apr 19, 2014 - 01:04:00 Apr 19, 2014 - 12:04:54 Apr 19, 2014 - 12:04:11 Apr 19, 2014 - 12:04:30 Apr 19, 2014 - 12:04:12 Apr 19, 2014 - 12:04:12 Apr 09, 2014 - 07:04:41 Apr 09, 2014 - 07:04:21 Apr 08, 2014 - 08:04:52 Apr 08, 2014 - 08:04:30 Apr 08, 2014 - 08:04:45 Apr 08, 2014 - 08:04:38 Apr 08, 2014 - 08:04:49 Apr 08, 2014 - 08:04:02 Apr 08, 2014 - 11:04:55 Apr 08, 2014 - 11:04:52 Apr 08, 2014 - 11:04:28 Apr 08, 2014 - 11:04:56 Apr 08, 2014 - 11:04:15 Apr 08, 2014 - 11:04:02 Apr 08, 2014 - 11:04:02 Apr 08, 2014 - 11:04:39 Apr 08, 2014 - 11:04:38 Apr 08, 2014 - 11:04:24 Apr 08, 2014 - 11:04:43 Apr 08, 2014 - 11:04:43 Apr 08, 2014 - 11:04:06 Apr 08, 2014 - 11:04:06 Apr 08, 2014 - 11:04:39 Apr 08, 2014 - 11:04:48 Apr 08, 2014 - 11:04:15 Apr 08, 2014 - 11:04:15 Apr 08, 2014 - 11:04:25 Apr 08, 2014 - 11:04:42

Newer

Installing Microhouse 2 Walls CEB Walls

Written By: Chris Reinhart (and 2 other contributors)

Comments: 0
Favorites: 1
Completions: 1

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 CEB Walls

Place your first two bricks on each corner.

Place your first two bricks on each corner.
NOTE: The image does not show the sill seal foam gasket. In MH 2, we will be using a sill seal gasket between the foundation and the CEBs.

Step 2

ABSOLUTELY CRITICAL QUALITY CONTROL: Measure the diagonals between outside corners of the CEBs. The measurement should be 19' - 9 1/2". For quality control, you can be no more than 1/4" off from this measurement.

ABSOLUTELY CRITICAL QUALITY CONTROL: Measure the diagonals between outside corners of the CEBs. The measurement should be 19' - 9 1/2". For quality control, you can be no more than 1/4" off from this measurement.
As you start each course, you will measure both diagonal, as shown in Image 1. You will also measure the outside-to-outside length of the straight sides, as shown in Image 2.