You're viewing a previously published revision of this guide.  View latest revision

Older
Nov 17, 2013 - 04:11:00
Nov 26, 2013 - 06:11:03 Nov 26, 2013 - 06:11:47 Nov 26, 2013 - 06:11:47 Nov 26, 2013 - 06:11:45 Nov 26, 2013 - 06:11:45 Nov 26, 2013 - 09:11:33 Nov 26, 2013 - 09:11:46 Nov 19, 2013 - 09:11:25 Nov 19, 2013 - 09:11:48 Nov 19, 2013 - 09:11:38 Nov 19, 2013 - 09:11:21 Nov 19, 2013 - 09:11:02 Nov 19, 2013 - 08:11:27 Nov 19, 2013 - 08:11:54 Nov 19, 2013 - 08:11:11 Nov 19, 2013 - 08:11:39 Nov 19, 2013 - 08:11:55 Nov 19, 2013 - 08:11:25 Nov 19, 2013 - 08:11:01 Nov 19, 2013 - 08:11:04 Nov 19, 2013 - 08:11:54 Nov 19, 2013 - 08:11:33 Nov 19, 2013 - 08:11:17 Nov 19, 2013 - 08:11:03 Nov 19, 2013 - 08:11:46 Nov 19, 2013 - 07:11:58 Nov 19, 2013 - 07:11:43 Nov 19, 2013 - 07:11:25 Nov 19, 2013 - 07:11:08 Nov 19, 2013 - 07:11:52 Nov 19, 2013 - 07:11:32 Nov 19, 2013 - 07:11:17 Nov 19, 2013 - 07:11:02 Nov 19, 2013 - 07:11:37 Nov 19, 2013 - 07:11:58 Nov 19, 2013 - 07:11:31 Nov 19, 2013 - 07:11:13 Nov 19, 2013 - 07:11:52 Nov 19, 2013 - 07:11:21 Nov 19, 2013 - 07:11:08 Nov 18, 2013 - 04:11:58 Nov 18, 2013 - 02:11:33 Nov 18, 2013 - 11:11:26 Nov 18, 2013 - 10:11:00 Nov 18, 2013 - 10:11:43 Nov 18, 2013 - 10:11:22 Nov 18, 2013 - 10:11:53 Nov 18, 2013 - 10:11:37 Nov 18, 2013 - 09:11:09 Nov 18, 2013 - 09:11:58 Nov 18, 2013 - 09:11:44 Nov 18, 2013 - 09:11:05 Nov 18, 2013 - 08:11:12 Nov 17, 2013 - 07:11:24 Nov 17, 2013 - 06:11:49 Nov 17, 2013 - 04:11:14 Nov 17, 2013 - 04:11:29 Nov 17, 2013 - 04:11:00 Nov 17, 2013 - 04:11:44 Nov 17, 2013 - 04:11:37 Nov 17, 2013 - 04:11:53 Nov 17, 2013 - 04:11:17 Nov 17, 2013 - 04:11:45 Nov 17, 2013 - 03:11:41 Nov 17, 2013 - 03:11:44 Nov 17, 2013 - 03:11:24 Nov 17, 2013 - 03:11:01 Nov 17, 2013 - 03:11:53 Nov 17, 2013 - 03:11:56 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:32 Nov 17, 2013 - 03:11:06 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:55 Nov 17, 2013 - 03:11:14 Nov 17, 2013 - 03:11:29 Nov 17, 2013 - 03:11:49 Nov 17, 2013 - 03:11:51 Nov 17, 2013 - 03:11:13 Nov 17, 2013 - 03:11:50 Nov 17, 2013 - 03:11:12 Nov 17, 2013 - 03:11:58 Nov 17, 2013 - 03:11:57 Nov 17, 2013 - 03:11:23 Nov 17, 2013 - 03:11:41 Nov 17, 2013 - 12:11:04 Nov 17, 2013 - 12:11:14 Nov 17, 2013 - 11:11:06 Nov 17, 2013 - 11:11:40 Nov 17, 2013 - 11:11:05 Nov 17, 2013 - 10:11:27 Nov 17, 2013 - 10:11:05 Nov 17, 2013 - 10:11:40 Nov 17, 2013 - 10:11:00 Nov 17, 2013 - 10:11:11
Newer

How to build Module - Trencher Rotor

Written By: Chris Reinhart (and 3 other contributors)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

  1. Attach bearing to "middle plate" (insert part number) as shown in image. Be mindful of orientation of grease zerk relative to plate. Must remain accessible once unit is fully assembled.

    • Attach bearing to "middle plate" (insert part number) as shown in image.

    • Be mindful of orientation of grease zerk relative to plate. Must remain accessible once unit is fully assembled.

  2. Attach bearing to "large bearing plate" (insert part number). This bearing faces inside the mount - towards the other bearing. Attach bearing to "large bearing plate" (insert part number). This bearing faces inside the mount - towards the other bearing.

    • Attach bearing to "large bearing plate" (insert part number). This bearing faces inside the mount - towards the other bearing.

  3. Attach motor to plate. (insert part number) Attach motor to plate. (insert part number) Attach motor to plate. (insert part number)

    • Attach motor to plate. (insert part number)

  4. Place hub. Insert nut and pin to hold in place. Place hub. Insert nut and pin to hold in place. Place hub. Insert nut and pin to hold in place.

    • Place hub. Insert nut and pin to hold in place.

  5. Info about the hub to plate or something Info about the hub to plate or something Info about the hub to plate or something

    • Info about the hub to plate or something

  6. Place hub-to-chain-link coupler. Tighten nuts in a star pattern. Tighten nuts in a star pattern.

    • Place hub-to-chain-link coupler.

    • Tighten nuts in a star pattern.

  7. Cut xx" shaft with bandsaw Drill xx" hole xx" from end of shaft Use oil to lubricate drill bit

    • Cut xx" shaft with bandsaw

    • Drill xx" hole xx" from end of shaft

    • Use oil to lubricate drill bit

  8. Step 8 (same as 7?) Step 8 (same as 7?)

    • Step 8 (same as 7?)

Author

with 3 other contributors

Chris Reinhart

Member since: 10/29/13

2,118 Reputation

18 Guides authored

View Statistics:

Past 24 Hours: 17

Past 7 Days: 126

Past 30 Days: 456

All Time: 4,083