Difficulty
Moderate
Steps
22
Time Required
- How to OSE Lasersaur Outer Frame 22 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Review Free CAD image
-
-
-
Lay out materials for outer frame from http://labs.nortd.com/lasersaur/bom-subs...
-
-
-
Preassemble corner pieces, 2 mirror images Use 3 double brackets. Until the very end, leave all connections loose.
-
-
-
Build second corner bracket for front of frame
-
-
-
Build middle vertical column, front, use 2 brackets.
-
-
-
Build middle rear vertical column.
-
-
-
Build rear 3rd corner vertical. Use 2 double and one single bracket. (note later time)
-
-
-
Build 4th rear corner vertical. (second pix at same time as last)
-
-
-
Build rear corner horizontal using a single bracket.
-
-
-
Do the same on the rear left corner.
-
-
-
Install rear vertical of overall frame
-
-
-
Install single bracket for rear left vertical, and rear right vertical.
-
-
-
nstall single bracket on right front cutting chamber horizontals.
-
-
-
Install middle black supports on the floor of the frame, using single black brackets, 1 per meeting point
-
-
-
Install 3 short 2040 extrusions on the rear base of the frame.
-
-
-
Tighten down all joints. Insert spring nuts as needed.
-
-
-
Inner distance between extrusions for the front compartment should be 86 cm.
-
-
-
Space between front horizontal and mid horizontal should be 41 cm on the inside.
-
-
-
Use the small polycarbonate separation panel - mark a .6x.6 cm corner cut out.
-
-
-
Cut the corner out with a dremel tool. The corner cutout allows the panel to fit against the walls of the frame.
-
-
-
Do the same for the second of the same panel.
-
-
-
Peel the protective covering from the small panel, and insert.
-
