Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
    • Take the 4x8 cm extrusions and 4x4 extrusions and make a box.

    • Take a FreeCAD image snapshot here and throughout.

    • Start by taking the 4080 extrusions - the short sides - and mounting the corner brackets to them.

    • Take a corner bracket. Use the corner bracket with the ridge in the middle.

    • Put in 4 spring nuts. Note that these may be inserted from the top of the rail, not necessarily from the side. Use 4 of these per corner bracket.

Robert Kirk

Member since: 4/28/13

2,008 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 11

All Time: 419