Difficulty
Moderate
Steps
15
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Begin preparing door frame.
-
-
-
Install 3 hinges - two towards the ends, and one in the middle, by eye.
-
-
-
Mount the 4040 extrusion top door frame, and it should be 2.8 cm off edge on each side.
-
-
-
When mounting the 4040 extrusion - push it all the way up so that hinges can close fully. The hinges must pushed as far to the corner of the extrusion as possible.
-
-
-
The two 6 cm wide tinted glazing pieces serve as a seal for the door. Mark hole locations and drill bolt holes through these, and mount to the hinged 4040 extrusion.
-
-
-
Match drill through the second piece of glazing.
-
-
-
Take the protective cover off the glazing.
-
-
-
Bolt the seals to the 4040 extrusion.
-
-
-
Begin assembling the door frame with corner brackets.
-
-
-
Build the verticals of the door frame.
-
-
-
Prepare door for mounting,
-
-
-
Place door on top of the gantry frame.
-
-
-
Mount 3 door mounts to the 4040 hinged extrusion. Use double brackets on the ends and a single bracket in the middle.
-
-
-
Mount springs.
-
-
-
Use 2 larger washers and 5 smaller washers on a 20 mm screw, and then 3 more larger washers.
-
