You're viewing a previously published revision of this guide.  View latest revision

Older
Oct 28, 2013 - 07:10:48
Oct 28, 2013 - 08:10:52 Oct 28, 2013 - 08:10:43 Oct 28, 2013 - 08:10:37 Oct 28, 2013 - 08:10:21 Oct 28, 2013 - 08:10:02 Oct 28, 2013 - 08:10:57 Oct 28, 2013 - 08:10:33 Oct 28, 2013 - 08:10:41 Oct 28, 2013 - 08:10:17 Oct 28, 2013 - 07:10:48 Oct 28, 2013 - 07:10:07 Oct 28, 2013 - 07:10:33 Oct 28, 2013 - 07:10:15 Oct 28, 2013 - 07:10:48 Oct 28, 2013 - 07:10:07 Oct 28, 2013 - 07:10:16
Newer

How to assemble the shears

Written By: Dan Benamy
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • Parts:

    • 2 2 hole x 4 hole plates

    • 2 1 hole x 4 hole plates

    • Drill holes through all 4 plates to mount blade. TODO size position, tools.

    • Parts:

    • 5 TODO size bolts

    • Put the bolts through the 2 bigger plates, the 2 smaller plates, and into the blade. Tighten.

    • The picture shows the middle plates being shorter but that's a amistake! All the plates should be the same length.

    • Punch a new row of 4 holes with the centers 1" from the edge. The holes should be 1 1/6". The should be every 2 inches.

    • Use a tape measure, punch, and hammer to make a dent in the right place.

    • Then punch them.

Author

Dan Benamy

Member since: 10/14/13

213 Reputation

3 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 351