You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 08, 2014 - 06:02:05
Mar 27, 2014 - 03:03:55 Mar 27, 2014 - 03:03:50 Feb 08, 2014 - 08:02:53 Feb 08, 2014 - 08:02:09 Feb 08, 2014 - 08:02:09 Feb 08, 2014 - 08:02:06 Feb 08, 2014 - 08:02:42 Feb 08, 2014 - 08:02:42 Feb 08, 2014 - 08:02:45 Feb 08, 2014 - 08:02:36 Feb 08, 2014 - 08:02:57 Feb 08, 2014 - 08:02:56 Feb 08, 2014 - 08:02:58 Feb 08, 2014 - 08:02:16 Feb 08, 2014 - 08:02:19 Feb 08, 2014 - 08:02:19 Feb 08, 2014 - 07:02:38 Feb 08, 2014 - 07:02:11 Feb 08, 2014 - 07:02:10 Feb 08, 2014 - 07:02:31 Feb 08, 2014 - 07:02:30 Feb 08, 2014 - 07:02:10 Feb 08, 2014 - 07:02:10 Feb 08, 2014 - 07:02:42 Feb 08, 2014 - 07:02:33 Feb 08, 2014 - 07:02:01 Feb 08, 2014 - 07:02:01 Feb 08, 2014 - 07:02:01 Feb 08, 2014 - 06:02:20 Feb 08, 2014 - 06:02:55 Feb 08, 2014 - 06:02:55 Feb 08, 2014 - 06:02:04 Feb 08, 2014 - 06:02:28 Feb 08, 2014 - 06:02:06 Feb 08, 2014 - 06:02:05 Feb 08, 2014 - 06:02:31 Feb 08, 2014 - 06:02:30 Feb 08, 2014 - 06:02:42 Feb 08, 2014 - 06:02:33 Feb 08, 2014 - 06:02:37 Feb 08, 2014 - 05:02:24 Feb 08, 2014 - 05:02:46 Feb 08, 2014 - 05:02:53 Feb 08, 2014 - 05:02:45 Feb 08, 2014 - 05:02:12
Newer

How to Module - Extruder Assembly

Written By: Robert Kirk
  • Comments: 2
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Gather parts and tools for Extruder Assembly Photo 1 - 1.5mm Allen Driver Photo 2 - 2.5mm Allen Driver

    • Gather parts and tools for Extruder Assembly

    • Photo 1 - 1.5mm Allen Driver

    • Photo 2 - 2.5mm Allen Driver

    • Photo 3 - 13mm Wrench

    • INSTALL IDLER BOLT

    • Install M3 x 25 SHCS, M3 Washer and M3 Nut into the Idler assembly

    • Only put the screw in until the tip is flush with the nut

    • TIP: Set M3 Nut into the hexagon cutout and hold with your finer to install the bolt

Author

Robert Kirk

Member since: 4/28/13

2,011 Reputation

24 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 294