Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

I really reccomend you watch the instructional video:

Sketchup ModelYou need to fit the cylinder into the frame so that when it is fully extended, the press foot is in the correct spot to eject the brick. You will need to torch holes in the horizontals for the pin which goes thru the cylinder, and weld DOM tubing to hold the pin.

Video Instructions

Dozuki System

Member since: 09/24/2009

1 Reputation

34 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 798