Tools
Parts
-
-
You can see in the color-coded picture that the floor modules use a total of 5 sheets of 4'X8' plywood.
-
Three of the sheets will be used in their full 4' width (red, yellow, and brown).
-
Two of the sheets (orange and green) are ripped into narrower strips.
-
Cut the plywood sheets to the dimensions based on dimensions shown in the drawing.
-
-
-
Before screwing on the floor decking, make sure the frame is square by checking the diagonals and adjusting the frame until both are the same measurement.
-
-
-
Attach the 4' wide sheet(s) first.
-
Three edges will be flush with the exterior of the frame.
-
One edge will break halfway on a joist. This is essential to have an attachment surface for the next sheet(s).
-
-
-
Two of your floor modules will look like this.
-
-
-
One of your floor modules will look like this.
-
-
-
Another of your floor modules will look like this.
-
