/
/

Site Navigation

Your Account

Choose Language

You're viewing a previously published version of this guide.  View latest version

Older
Feb 16, 2015 - 06:02:42
Feb 16, 2015 - 06:02:42 May 08, 2013 - 12:05:45 May 08, 2013 - 12:05:45 May 08, 2013 - 12:05:40 May 08, 2013 - 12:05:38
Newer

CEB: Feet

Written By: Dozuki System
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

1

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Introduction

  1. Mark and magdrill or punch the holes (13/16") in the lower press foot. Place this centered on the upper press plate and transfer punch the hole locations.

    • Mark and magdrill or punch the holes (13/16") in the lower press foot.

    • Place this centered on the upper press plate and transfer punch the hole locations.

    • Mag-drill these holes.

    • Torch out the hole in the center of the lower press plate.

    • Grind it smooth.

  3. Plug weld the threaded rod into the upper press plate, so that the threaded rod is about 1/4" deep in the plate. Fill the hole with weld, then grind it flush. The upper press foot NEEDS to be 12" exactly across at the top of it (the side without the bolts sticking up) or there will be "fuzzy edges" on your bricks. See the video for more info.

    • Plug weld the threaded rod into the upper press plate, so that the threaded rod is about 1/4" deep in the plate.

    • Fill the hole with weld, then grind it flush.

    • The upper press foot NEEDS to be 12" exactly across at the top of it (the side without the bolts sticking up) or there will be "fuzzy edges" on your bricks. See the video for more info.

Author

Dozuki System

Member since: 09/24/2009

1 Reputation

34 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 274