Difficulty
Moderate
Steps
1
Time Required
- CEB Frame: Weld Spacers 1 step
User-Contributed Guide
This guide is not managed by the site's staff.
Tools
Parts
No parts specified.
-
-
Lay the frame on it's side.
-
Protect the cylinder and press feet so that when you weld, spatter won't stick. You could use some piece of metal or a nonflammable cloth.
-
On the inside, bottom edge, weld the interior of the spacer inwards as far as you can. This should be an inch or more. Do this in all 4 corners accessable from this side of the frame. See the photo.
-
Weld the top 100%, and grind it flush.
-
Flip over the frame.
-
Weld this side as you did the other side, also welding inside the spacers.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
