-
-
This image shows the completed northwest sub-module.
-
-
-
Begin with an 8' long 2x8. Cut it to 6' 11 1/2" as shown in the image.
-
Make the notch shown in the image. The image shows the notch at 7 1/4", but I would make it 7 5/8". You want to leave 3 1/2" of board when you are finished making the notch.
-
-
-
Make 8 studs at 4' - 9 9/16" long, to be used as shown in the image. These pieces are all identical to each other.
-
Cut these pieces from 6' 2x4s.
-
Make a top plate that is 6' - 11 1/2" long. Cut this from an 8' 2x4.
-
-
-
ADD STEP HERE ABOUT LAYING OUT THE TOP PLATE.
-