You're viewing a previously published revision of this guide.  View latest revision

Older
Apr 17, 2014 - 07:04:01
Apr 17, 2014 - 07:04:40 Apr 17, 2014 - 07:04:39 Apr 17, 2014 - 07:04:52 Apr 17, 2014 - 07:04:01 Apr 17, 2014 - 07:04:25 Apr 17, 2014 - 07:04:58 Apr 17, 2014 - 07:04:52 Apr 17, 2014 - 07:04:52 Apr 17, 2014 - 07:04:46 Apr 17, 2014 - 07:04:22 Apr 17, 2014 - 07:04:21 Apr 17, 2014 - 07:04:44 Apr 17, 2014 - 07:04:44 Apr 17, 2014 - 07:04:02 Apr 17, 2014 - 07:04:01 Apr 17, 2014 - 06:04:21 Apr 17, 2014 - 06:04:21 Apr 17, 2014 - 06:04:06 Apr 17, 2014 - 06:04:19 Apr 17, 2014 - 06:04:19 Apr 17, 2014 - 06:04:24 Apr 17, 2014 - 06:04:55 Apr 17, 2014 - 06:04:39 Apr 17, 2014 - 06:04:39 Apr 17, 2014 - 06:04:01 Apr 17, 2014 - 06:04:00 Apr 17, 2014 - 06:04:15 Apr 17, 2014 - 06:04:15
Newer

Building the MicroHouse 2 Beam Module

Written By: Chris Reinhart
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. This is what the final Beam Modules will look like.

    • This is what the final Beam Modules will look like.

  2. Start with 4, 14' 2x8s.

    • Start with 4, 14' 2x8s.

    • Cut each of the 2x8s to 13' - 10 3/4" in length.

  3. Make 6 short 2x8 pieces for both ends of each beam, each 11 3/8" in length. Cut these from 8' 2x8s.

    • Make 6 short 2x8 pieces for both ends of each beam, each 11 3/8" in length. Cut these from 8' 2x8s.

    • You will make 24 of these pieces total.

    • Also make 4 end caps, one for each end of both beams. You can make this from the left-over sheet material from the door or window modules (5/8" plywood).

    • The plywood endcaps measure 7 1/2" by 12"

  4. Begin assembly by pairing the long 2x8s and attaching them together with nails. Use 2 1/2" long nails, and nail in groups of three approximately every 16" along each beam.

    • Begin assembly by pairing the long 2x8s and attaching them together with nails. Use 2 1/2" long nails, and nail in groups of three approximately every 16" along each beam.

  5. Next, add one of the short 2x8 blocks to each end of both beams. (The first image shows just one of the beams).

    • Next, add one of the short 2x8 blocks to each end of both beams. (The first image shows just one of the beams).

    • Keep the block flush with the top, bottom, and end of the beam.

Author

Chris Reinhart

Member since: 10/29/13

2,211 Reputation

18 Guides authored

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 2

All Time: 108